IO623 FlexRay I/O Module

IO623: FlexRay I/O Module

FlexRay I/O Module with 1, 2 or 4 Bus Interfaces, and Simulink^® Driver Blocks

The IO623 I/O module provides up to four FlexRay controllers (A and B channels) that ensure deterministic transmission with high data rates of 10 Mbit/s per channel and high fault tolerance. Simulink^® driver blocks are also provided.

The IO623 features four TJA1080 FlexRay transceivers, which provide an advanced interface between the protocol controller and the physical bus in a FlexRay network. The signals can be accessed through four Binder 712 8-pol front connectors.

This I/O module is ideal for closed-loop controls, hardware-in-the-loop simulations and restbus simulation using MATLAB^® and Simulink^®.

The IO623 I/O module is fully compatible with the Simulink^® Real-Time™ workflow. The extensive Simulink^® Real-Time™ driver blockset offers comprehensive functionality.

Key Features

One, two or four independent FlexRay controllers (A and B channels)
Reads configured FlexRay frames
Writes FlexRay frames
Complies with the V2.1 A FlexRay protocol specification

Physical
Form factor	PMC
Bus	PCI 32-bit, 33 MHz
Power requirements	100 mA typ. @ +3.3 V DC 250 mA typ. @ +5 V DC
Connectors	4x Binder 712 8-pol connector
Environmental
Operating temperature	-40 °C to +70 °C
Relative humidity	10% to 90%, non-condensing
Certification	CE
Flex Ray
Number of interfaces	1, 2 or 4 FlexRay controllers (A and B channels)
FlexRay bus interface	NXP TJA1080 transceiver

Item ID	Product Name	Components
2A623X	IO623-01	1x IO623 FlexRay I/O module (1 channel) Speedgoat I/O Blockset for Simulink^® Real-Time™ Comprehensive documentation and Simulink^® example models Installation into the real-time target machine
2B623X	IO623-02	1x IO623 FlexRay I/O module (2 channels) Speedgoat I/O Blockset for Simulink^® Real-Time™ Comprehensive documentation and Simulink^® example models Installation into the real-time target machine
2D623X	IO623-04	1x IO623 FlexRay I/O module (4 channels) Speedgoat I/O Blockset for Simulink^® Real-Time™ Comprehensive documentation and Simulink^® example models Installation into the real-time target machine

Optional Accessories
305623	8-pin Male Binder 712 to 9-pin Female D-sub Cable	2 m cable with 8-pin Binder 712 connector on one end and 9-pin D-sub connector on the other end.
305624	8-pin Male Binder 712 to 2x 9-pin Female D-sub Cable	2 m cable with 8-pin Binder 712 connector on one end and 2 x 9-pin D-sub connector on the other end.

Key to X in Item ID
Please replace the X with the code number of the specific target machine into which this I/O module shall be installed:

5 = Mobile real-time target machine
6 = Performance real-time target machine
8 = Baseline real-time target machine

Pricing information
We don't publish pricing information on our website. Upon request by e-mail or phone we can provide a complete price list covering our entire product portfolio in various currencies. We recommend that you get in touch with us to discuss your specific needs. We can then quickly provide you with a tailored quotation including technical and pricing information.